Maintaining Server and Control Room Equipment - Part 1

Key Topic Areas

Module 1 - System Interrogation:

The module will cover:

• Health and Safety (relevant for the working environment covered within this course);
• Explanation and purpose the LTT SCADA O&M Manuals:
• IP Addresses and Ports;
• Programming Terminals;
• Software Components;
• User Guides;
• Equipment Build and Configurations;
• Explanation of Maintenance, Monitoring and Analysis Control (T006);
• Main Works Device Virtual Local Area Network (VLAN):
• Log information;
• Server Worksite Network Device VLAN:
• Log Information;
• SIEM (Security Information and Event Management) – Traffic analysis and log analysis.

Module 2 - Maintaining Server and Control Room Equipment – Introduction:

The module will cover:

• Health and Safety (relevant for the working environment covered within this course);
• Refresh of what the Server and Control Room equipment is and what it does;
• Explanation of As-built Records;
• Explanation of all equipment at Server and Control Room;
• Explanation of how to clean and calibrate equipment;
• Explanation of how to perform routine replacement of consumables;
• Explanation of Server and Control Room Build and Configuration Documents:
• Server Build and Configuration Document;
• Firewall Build and Configuration Document;
• Ethernet Switch Build and Configuration Document;
• Workstation Build and Configuration Document;
• PLC Build and Configuration Document;
• Explanation of how to deploy software and patch updates;
• CMMS update processes.

Module 3 - Network, Domain and Security Management:

The module will cover:

• Health and Safety (relevant for the working environment covered within this course);
• Network Segmentation;
• Cyber Security Control Measures;
• Network, Domain and Security for Worksite Types:
• Type 1 = Standard MWC Worksite;
• Type 2 = Server Worksite;
• Type 3 = MWC Interface Worksite;
• Type 4 = Control Room Worksite.

Module 1 - System Interrogation:

This module will provide Delegates with the information they need to understand the control procedures implemented within the LTT SCADA Control System, and to interpret the information captured within the log files.

On completion of the training, Delegates will be expected to:

• Understand the structure and contents of the O&M manuals;
• Understand the T006 Control procedure;
• Be able to interrogate the Log Information gathered form the Main Works VLANs;
• Be able to interrogate the Log Information gathered form the Server Worksite VLANs.

Module 2 - Maintaining Server and Control Room Equipment – Introduction:

This module will provide Delegates with an understanding of how the System Integrator Contractor has developed the as-built records for the server and control room equipment, how to locate the equipment when on site and understand from a practical perspective how to apply software updates and maintenance system updates.

On completion of the training, Delegates will be expected to understand:

• The as-built drawings and records for the Server and Control Room;
• How to locate the equipment at Beckton;
• The requirements for inspection, cleaning, and consumables replacement;
• The Server and Control Room Build documentation;
• How to deploy software updates and patches;
• The CMMS update processes.

Module 3 - Network, Domain and Security Management:

This module will provide the Delegates with the information needed to understand how the LTT SCADA Control System’s network has been configured and the security packages that have been implemented.  On completion of the training, Delegates will be expected to:

• Understand the network segmentation for the LTT SCADA Control System;
• Understand the Cyber Security Control measures that have been implemented;
• Be able to manage the network and security at all four worksite types.

Before attending the training, Delegates are expected to complete:

• LTT System Overview;
• LTT SCADA – Basic Understanding;
• LTT SCADA – Operations (Part 1);
• LTT SCADA – Operations (Part 2);
• LTT SCADA – Operations (Part 3);
• LTT SCADA – Operations (Part 4);
• LTT SCADA – System Maintenance.

Before attending the training, Delegates are also expected to have:

• Knowledge of cybersecurity;
• A background in computer science and network infrastructure.