Training Catalogue

This course will provide an appreciation of the LTT system, its components, and interactions with the sewage treatment works and network during operations. It will also provide an understanding of the principles of the LTT Operating Techniques.

This course will provide an understanding of the LTT System, its operational components and its interaction with the network.

This course will provide Delegates with the skills needed to respond, interrogate and record faults communicated via various sources such as the LTT SCADA System. The course will include referencing maintenance performed to correct faults recorded in the CMMS.

This course will provide training in how to respond to specific operating scenarios and incidents at an MWC worksite. It will include how to shut down plant and/or systems in the event of an emergency; connect temporary generators in the event of power outages; respond to fires in the ventilation and air treatment systems; clear vortex blockages.

This course provides an introduction to the following documents that apply to the System Acceptance Period: Health, Safety, Security and Environment (HSSE) Protocol and the Incident and Crisis Management Plan.

This course provides an introduction to the access control and permitting process and procedures for the System Acceptance Period.

This course will provide an understanding of the common hazards across the IP Works and highlight the key hazards that are specific to individual MWC worksites.

This course will provide training in opening hinged access covers and pre-use ladder inspections.

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour (Public name - Effra Quay & Isle of Effra)

Site Familiarisation tour

Site Familiarisation tour (Public name - Bazalgette Embankment)

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour (Public name - Chelsea Quay)

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour

Site Familiarisation tour (Public name - Tyburn Quay)

This is course will provide Delegates with a basic understanding of the LTT SCADA System. On completion of the course, Delegates will be able to log on to LTT SCADA and navigate through the screens, understand the mimics; access and print reports and log off successfully from the System.

This course follows on from the LTT SCADA Basic Understanding course and provides Delegates with a wider understanding of the LTT SCADA System. On completion of the course, Delegates will understand the User Groups and the privileges and operational controls assigned to those groups. They will be able to amend setpoints and gain an understanding of Historian auditing and archiving.

This course will provide Delegates with the information they will need to understand the reporting facility within LTT SCADA and how to generate, email and print reports. It will also provide the Delegates with an understanding of how to configure and view trends within the LTT SCADA System.

This course will provide Delegates with an understanding of the alarms within the LTT SCADA System, how they are displayed and how to manage and control them through their lifecycle.

This course covers three training modules. On completion of the Course, Delegates will be able to understand and operate the LTT SCADA System during normal wet weather and extreme wet weather and understand how the equipment that is needed and affected by this operation functions.

This course covers two training modules. On the completion of the course, Delegates will understand the status of tunnel-wide operations; be able to view the Lee Tunnel mimics and understand the status of the Lee Tunnel. Delegates will also understand the interface between the Regional and LTT SCADA and will know how to monitor the status of all worksites, including the status of plant equipment across the LTT.

This course covers two training modules. On completion of the course, Delegates will understand and know how to amend setpoints within LTT SCADA and understand how operational tasks within LTT SCADA are managed and processed.

This course covers two training modules. On completion of the course, Delegates will understand how to recognise failures and how they are presented within the LTT SCADA, including the alarms associated with each type of failure. The course will include telecommunication, device, and power failures.

Module 1 provides high level information on the main hardware elements of the LTT SCADA system, where they are located, how they are connected and their functionality. It also covers the system role of the Telemetry Panels. Module 2 provides information behind the design of the worksite Telemetry Panels and the difference between them and the worksite PLCs provided by the MWCs. The course also covers PLC functionality.

The course provides information on the as-built documents and the location of SIC-installed equipment in the worksites.

Module 1 provides information on the maintenance plans and schedules for the telemetry panel equipment installed on a worksite. Module 2 provides Delegates with the practical skills needed to locate and maintain Telemetry Panel equipment at the main work sites.

Consists of 4 modules. System Overview; Server Equipment and Interfaces; PSC Panels and Interfaces; Control Room Equipment and Interfaces

The course provides information on the as-built documents and the location of SIC installed equipment in the worksites.

Module 1 provides information on the maintenance plans and schedules for the Telemetry Panel equipment installed on a worksite. Module 2 provides Delegates with the practical skills needed to locate and maintain Control Room equipment at the main work sites.

The course provides information on the as-built documents and the location of SIC installed equipment in the server racks.

Module 1 provides information on the maintenance plans and schedules for the server equipment installed at Beckton. Module 2 provides Delegates with the practical skills needed to locate and maintain server equipment at Beckton.

The course provides Delegates with an understanding of the as-built documents and the location of SIC installed equipment in the worksites

Module 1: – Management of Routine and Reactive Maintenance – Supervisory Panel (2 hours) Module 2: – Maintenance Supervisory Panel Equipment – Practical (2 hours)

The course provides information on the as-built documents and the location of SIC installed equipment in the worksites.

Module 1 provides information on the maintenance plans and schedules for the Interface panel equipment installed on a worksite. Module 2 provides Delegates with the practical skills needed to locate and maintain Interface Panel equipment at the main work sites.

Module covers Cyber security, Siem solution, Network segregation, Network management tools and Solar Winds alarm system

This course will provide training on how to inspect the carbon cassettes and deluge pipework; sample and replace the carbon media; replace the carbon cassettes.

This course will provide training on how to inspect the air management plant; check and fine tune the ventilation dampers; undertake routine fan maintenance activities; remove/replace air management plant. It will also introduce possible reactive maintenance scenarios and the recommended responses.

This course will provide training on how to carry out routine inspections and maintenance of the air monitoring plant. It will also introduce possible reactive maintenance scenarios and the recommended responses.

This course will provide an understanding of the control philosophy of the FALPS Low Flow Pumping Station and operating scenarios. It will also provide training on the maintenance requirements for the valves, pumps, and the dry well ventilation system, and how to operate the dry well ventilation system.

This course will provide training on how to use the HMI to operate plant and interrogate plant status.

This course will provide training on how to operate and inspect the different access cover types used across the Thames Tideway Tunnel (TTT) scheme, including hinged access covers; drop-in access covers, multi-leaf access covers, and beamed multi-leaf access covers. It will also provide training on how to replace the seals on the access covers.

This course introduces the CMMS. It will provide guidance on where to find information in the O&M manuals and an introduction to the maintenance schedules.

This course will provide an understanding of the risks inherent in maintaining the mechanical isolations, routine maintenance requirements, reactive maintenance scenarios, access arrangements, including access for remote Closed-circuit Television (CCTV) inspections. It also provides training on how to deploy secondary isolation gates and vortex safety grilles.

This course will provide training on how to inspect and operate the electrical systems (such as the distribution equipment) at a MWC worksite; check the calibration of the level and temperature instrumentation; inspect the Kiosk building services, including the fire alarm system and the intruder alarm system; inspect the non-architectural lighting.